Algipol

• Printing Product which can replace Sodium Alginate
• Gives good colour yield with good penetration of colour into fabric
• After steaming they wash off more readily leaving the fabric with a very soft handle
• Suitable for different applications and fixing methods for printing with reactive dyes

Ambifin

• Acrylic softener cum stiffener based on acrylic copolymer emulsion
• Combines excellent softness and low temperature flexibility
• Cross linking of films deposited from it takes place upon drying without the use of thermosetting additives
• Gives a soft silky hand with good durability and sewability
• Readily dispersible in cold water
• Product can be used as a top softener

Ambimul - FP

• Polyvinyl acetate emulsion
• Self Cross linking emulsion
• Imparts excellent stiffness and low temperature flexibility cross linking of films
• Gives a soft hand with good durability and sew ability

Biopolish - 125

• Specially Blended Cellulose Enzyme for improving softness of fabric
• It polishes surface of the fabric by emitting protruding fibers
• It removes hairiness of the fabrics
• Fabric after bio-polishing, has a great improvement in dyeability

Brighton - MDC (Cotton) / NR (Polyester) / W 33 (Wool)

• Bathochromic Agents used in finishing
• Increases the darkness of a dark dyed fabric - Reactive Black / Navy Blue / Dark Green
• Durable Effect
• Gives Unique tone and depth wiz unmatchable even with high dosage of dyeing
• No need of curing
• Helps in Denim Fabric Processing - in over dyeing

Cooldry - V - 1471

• Finishing agent which Imparts excellent and durable water absorption properties on 100% Polyester
• Imparts good economical soil release/comfort finish as well as dye leveling properties on Polyester
• Prevents crease marks during dyeing
• Applied either in jet dyeing or padding equipment followed by drying and heat setting (175oC ~ 190oC)
• Imparts durable comfort properties after repeated washings

Crylicon - SP

• Acrylic copolymer based stiffener
• Combines excellent softness and low temperature flexibility
• Cross linking of films deposited from it takes place upon drying without the use of thermosetting additives
• Gives a soft silky hand with good durability and sewability
• Readily dispersible in cold water
• Product can be used as a top softener

Defoamer - MRX - 5000

• Concentrated pure silicone defoamer
• Diluted up to 5 times by adding water
• Milky white emulsion type defoaming agent
• Both properties of destroying existing foam and preventing from foaming

Dyefix - 200

• Dye Fixing agent for reactive and direct dyes
• Marked improvement in water, perspiration and wet pressing fastness of Direct dyestuffs
• Helps in reducing bleeding of Reactive dyeing and prints

Fixer - 110

• Cross Linking agent for acrylic, urethane, polyester, synthetic rubber latex binders
• Low temperature curing
• Suitable for padding and printing

Foaming Binder HT - 224 - W

• Heat–sensitive foaming binder - high - temperature type
• Solid three dimensional design can be obtained by heat treatment (160oC)
• Suitable for printing by auto-screen

Kunaltex - MP

• Special Finishing Softener used in conjunction with Parasol - 2000 for improving wet and dry rub fastness on denim fabric dyed with sulphur black / Indigo
• Applicable to all kinds of fabrics
• To be used by Padding method
• Very good in DP improving property when used with Resin

Kunalwhite 2B

• Optical Brightening agent with moderate affinity for natural cellulosic fibers
• Product is stable in resin finishing bath with pH above 5.5
• Product gives good crease resistivity

Lube - DCP / conc.

• Cationic Polyethylene softener
• Can be used in synthetic resin finishing to all kind of substrates
• Imparts smoothness, good washing fastness and improves crease recovery in combination with synthetic resins
• Improves sewability
• Light fastness of the substrates stays unaffected
• Improves tear and tensile strength of the substrate

Meikatex - HPD - 200

• Anti-pilling Agent
• Pilling rate will increase from 1 to 4 rate with this process
• Also helps to increase tear strength, abrasion resistance and crease recovery
• Best for Polyester Saris, Cambric, 67/33. 80 / 20 blends and for 100% Cotton Knitting

Micro Encapsulated perfume

• Finishing agent for imparting perfume finish to the fabrics
• Micro encapsulated granules with excellent aroma retention are dispersed stably in high concentration
• Compatible with Acrylic binders which are used to make the finish more durable
• Various Perfumes like Lemon, Lavender, Rose, Bouquet etc are available

Neutracore - K

• Neutralising agent based on Core alkali
• Applied to the fabric in final stage for alkali after mercerization and for alkali process

Nikkanon - CSB

• Most powerful anti-slipping agent for cotton, polyester and its blends
• Good hand modifier for textiles in general

Odonil - RS

• Reactive softener designed to reduce formaldehyde or amine odour during processing
• Used as a top finishing agent on fabrics

Para guard 30 new conc.

• Fluoro carbon based water & oil repellent finishing agent
• Compatible to most of the resin, processing agent, softening agent, and catalyst
• It doesn’t include Alkyl phenol ethoxylate
• Fabrics treated are soft, as compared to other water and oil repellent agents available in the market
• Durable after washing

Para resin - UT - 80

• Nonionic type water based thermo setting type urethane resin for
• Excellent soft resilience
• Shows good crease recovery to the cellulose based textile and its blended fabrics
• Especially, it shows super crease recovery in wet condition

Para Softener - KRC

• Reactive Durable Softener based on Octa Decyl Ethelene urea
• Softener which increases tear & tensile strength by 50% of silk
• It is neutral and in white paste form
• Water Repellency Extender
• Good Drape and Touch
• Fabrics treated are entirely free from oxidizing, smelling, colouring or discolouring from ageing

Paracat - PG - 9

• Blocked iso-cyanate based cross linking agent
• Can be paired with Fluoro carbon based water and oil repellents
• Helps to increase the durability of water and oil repellency finish

Parakil - HF

• Enzyme based product developed exclusively for removal of hydrogen peroxide after bleaching
• Active ingredient is an enzyme which completely and selectively decomposes hydrogen peroxide without affecting the fabric structure

Parasilicone - BS 30

• High conc. Micro amino silicone emulsion softener
• New type silicone softening agent made by emulsifying high polymerized amino modified silicone
• Gives slipperiness, lubricity and drapability to natural fiber, synthetic fiber, cotton/synthetic fiber mixed spun goods
• Entirely free from oxidized oil stain by heating and chloride damage

Parasoftener - KRC - 400

• Concentrated PARASOFTENER KRC
• Unique reactive softener based on Octa Decyl-N'-ethylene urea type product
• Neutral and white paste form
• Imparts fast softening and water-proofing effects to fabrics

Parasol - KP

• Special emulsifier cum thickener to improve quality of printing pigment paste

Parasol - OEX 123

• Pure acrylic binder for pigment printing to get softest print
• Self curing binder
• Imparts excellent fastness and soft handle
• Excellent mechanical stability, film stretch ability and brightness of colour
• Special purpose self curing binder for application of perfume series in finishing

Penetrol DTC

• Crypto anionic scouring liquid detergent
• Excellent detergency, high wetting and dispersing power
• Effective carrying capacity for soil and fats
• Good compatibility allows it to be used widely in preparatory wet processing of cellulosics and synthetics fibers

Penetrol - N - conc.

• Non-Ionic Wetting and Scouring agent
• Manifold uses in wet processing
• Can also be used as Emulsifying Agent for preparing emulsions of vegetable oil and mineral oils

Photochromic Colour

• Micro Granule based Ink
• Micro Granules dispersed stably in high concentration
• Solar / UV light sensitive colour change
• Colorants which change colour when exposed any source of UV like Sunlight or UV lamps

Plasticryl - ASP

• Anti-migrating agent used in dyeing
• Prevents migration of dyes from dyed part to non dyed part

Polymer - RFP

• Finishing agent for denim processing based on water - soluble polymer containing no formaldehyde
• Reactive product that forms a strong film upon drying
• It is also reactive toward other compounds bearing labile hydrogen
• Has a durable effect when applied to textile
• No special cure conditions or catalysts are required. But if curing is available than you will get better result
• Improve and wet and dry rubbing fastness

Polyscour - FB

• Single bath scouring and bleaching agent
• For 100% Cotton and Polyester blended fabric
• Dissolves and removes the natural and added impurities from fabric
• Impurities such as Oil, Fats and Waxes are removed by solubilising and emulsifying them in a very short period
• Excellent emulsifying properties - hence helps in removing of oil stains formed during spinning and weaving

Reactofix - NF

• Polyamine and non-formalin type dye fixing agent for the reactive colour on cellulosic fiber
• Good washing and perspiration fastness of the reactive dyed materials
• No influence on shade of dyed materials
• Does not stain the white ground of the printed materials

Resin - AA

• Finishing agent based on Water soluble high polymer having acrylic and vinyl groups
• Excellent for finishing as well as sizing purposes
• Remarkable advantages over normal finishing or sizing compounds
• Imparts smooth and stiff finish to the fabric

Rubber Binder FET - B

• Non-formaldehyde type binder
• For pigment printing on T-shirt, Sweatshirt etc.
• Suitable for T-shirts made of cotton or polyester/cotton blended fabrics
• It is excellent in smoothness of printed surface, soft handling and elasticity
• Shows excellent adhesion fastness as well

Sanyobright

• Synthetic thickening agent for reactive dyestuffs and disperse reactive dyestuffs
• Used as half emulsion during kerosene printing
• Printing is much sharper

Softwhite - HC - 40

• Cationic Softening agent
• In finishing preparation with starch and similar products, it improves pliability and softness of finished goods
• Act as an antistatic agent if used on synthetic and blend materials

Softwhite HCS

• Cationic softener non yellowing type
• Good for batch wise as well continuous application

Sonic - 202

• Excellent silicone softener for wovens
• Widely used for shirting and bottom weights fabrics
• Improves anti-creasing property and sew ability

Stabilizer - KA - 20

• Extremely versatile peroxide stabilizer
• Can be used to advance in all bleaching systems
• Does not contain a surfactant; hence surfactant should always be used in conjunctions with it when bleaching cotton
• Highly effective sequestrate under the alkaline conditions of peroxide bleaching

Stripjet - FSR

• An Unique Finishing agent to strip off any kind of finishes imparted to fabrics
• Finishes like Resin, Fluoro carbons and silicones are easily stripped off
• Stable in acidic & alkaline condition
• Resist oxidation & reduction process
• Stable at higher & lower temperature
• Clean up stains mainly by oligomers

Superfine - S

• Highly reactive type softener
• Strong affinity for Cotton, Remy, Linen, Rayon, Nylon, Wool, Acrylic Fibers and their blends
• Imparts excellent feel and body to fabrics

Supersilk - 99

• Non yellowing cationic softener
• Widely used non-Ionic highly reactive softener
• Recommended for Synthetic, Wool and Cotton fabric for full and smooth handle
• Stable to hard water where as other commercial softeners are not

Texassist Series

• Best Anti-Slipping Agent helps reduce pilling on a majority of Textile substrates
• Significant Improvement of Seam Slippage
• Excellent anti pilling performance of woven fabrics especially for school uniforms and ladies and gents trousers and skirts
• Giving the garments a longer wear life than that of untreated garments
• Enabling extremely durable finish and ease of application

Thermochromic Colour

• Micro Granule based ink
• Micro Granules dispersed stably in high concentration
• Temperature sensitive colour change
• Colorants which change colours reversibly reacting to the changes of ambient temperature

Unimine - ECO

• Special modified glyoxal resin
• Imparts low formalin finish
• Used for many kinds of permanent washing resistance finish for natural fibers

Unimine - KVSP

• New type of Resin ; cyclic reactant with built-in catalyst system
• Product can be used in anti-crease finishing of cotton, rayon and their blends with polyester
• Fabrics finished with Unimine - KVSP with polyethylene emulsion are much softer as compared to conventional cyclic reactants like DMEU, DMDHEU and Propylene Urea based products

Unimine ZF

• Resin with zero formaldehyde
• Improving anti-creasing property
• May be used to replace formaldehyde containing resins and reactants in durable press finishes, and other finishes requiring dimensional stability and/or good recovery angle

Unimul - 800

• Specially developed polymeric product
• Applied for finishing of Interlining Cloth , Canvas and fabrics where stiffness is important
• Maximum Stiffness with Flexibility and Surface Smoothness is achieved
• Durable to washing

Unisol - FBSN

• Dispersing agent which is highly efficient in removing insoluble and sparingly soluble calcium salts, pectins and other impurities
• Prevents the build-up of these materials on machine surfaces on the goods being processed
• Precipitation of hardness salts is prevented and liquor stability is vastly improved by the excellent protective function of the product
• No de-metallising effect on dyestuffs and substantially improves penetration and distribution of the dye liquor, leading to improved leveling

Wettanol N - 100

• Non ionic base most powerful wetting agent
• Can be used as Emulsifying agent for preparing emulsions of veg. oils and mineral oils
• It has many fold uses in wet processing

Yoto - 999

• Newly developed pigment printing agent of oil-in-water type
• Sharp, clean cut prints are available
• Excellent leveling is achieved
• Brilliant prints of high colour value are obtained
• Rubbing fastness after can drying is considerably high
• Curing at 145-150o for 3 minutes promises the highest degree of fastness
• Applicable to Polyester 100% and T/C
• Excellent printability, especially in screen printing